{"id":4421,"date":"2026-05-29T18:23:06","date_gmt":"2026-05-29T10:23:06","guid":{"rendered":"https:\/\/ytcarbonfiber.com\/?post_type=product&p=4421"},"modified":"2026-06-08T22:37:00","modified_gmt":"2026-06-08T14:37:00","slug":"ares-13-inch-carbon-fiber-industrial-drone-frame","status":"publish","type":"product","link":"https:\/\/ytcarbonfiber.com\/de\/produkt\/ares-13-inch-carbon-fiber-industrial-drone-frame\/","title":{"rendered":"Ares 13 Inch Industrial Carbon Fiber Frame"},"content":{"rendered":"

Product Details<\/h2>\n

The Ares 13 inch carbon fiber drone frame<\/strong> is where our lineup stops being about FPV and starts being about work. 785g of carbon fiber with 10mm arms and a 4mm bottom plate \u2014 this isn’t a frame you fly for fun on the weekend. It’s a frame you deploy because something needs inspecting, spraying, mapping, or monitoring, and it needs to happen reliably. This Ares 13 inch carbon fiber drone frame<\/strong> is built for conditions that would shake a lighter frame apart.<\/p>\n

10mm Arms on the Ares 13 Inch Carbon Fiber Drone Frame<\/h3>\n

Let’s talk about those 10mm arms. The MARK4 series maxes out at 8mm because that’s enough for FPV and light commercial use. The Ares doesn’t care about saving weight \u2014 it cares about not bending. When you’re flying a 2kg+ AUW rig on 13-inch props with heavy batteries and industrial sensors hanging off every mounting point, arm flex isn’t an inconvenience. It’s a failure mode. Ten millimeters of 3K T300 carbon fiber per arm eliminates that concern entirely. We press our own sheet and cut every arm in-house, so that 10mm thickness is the same on frame #1 and frame #1000.<\/p>\n

4mm Bottom Plate on the Ares 13 Inch Frame for Industrial Landings<\/h3>\n

The 4mm bottom plate is the other headline. Every MARK4 frame uses 3mm. The Ares jumps to 4mm because the bottom plate on an industrial drone does different work \u2014 it’s the structural foundation that everything else bolts to, and it takes the impact on every landing. On a commercial inspection drone that lands on concrete pads, gravel roads, and ship decks, that extra millimeter is the difference between a frame that lasts a season and one that lasts for years.<\/p>\n

Wide X-type layout. Four arms of equal length meeting symmetrically at the center. No side plates \u2014 the Ares doesn’t need them because the 4mm bottom plate and 10mm arms form a rigid enough structure on their own. Camera side plates are 2.0mm for mounting your inspection cameras and thermal sensors. If you’re choosing between this and the MARK4 V2 13-inch, the question is simple: do you want a 370g frame that can carry commercial gear, or a 785g frame that’s built from the ground up to be commercial gear?<\/p>\n

<\/p>\n

Specifications<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Specification<\/th>\nDetails<\/th>\n<\/tr>\n<\/thead>\n
Model<\/strong><\/td>\nAres 13 Inch<\/td>\n<\/tr>\n
Dimensions<\/strong><\/td>\n478 \u00d7 480 \u00d7 44.6mm<\/td>\n<\/tr>\n
Wheelbase<\/strong><\/td>\n594mm<\/td>\n<\/tr>\n
Frame Weight<\/strong><\/td>\n785g (frame only)<\/td>\n<\/tr>\n
Frame Design<\/strong><\/td>\nWide X-Type<\/td>\n<\/tr>\n
Arm Material<\/strong><\/td>\n10mm 3K T300 carbon fiber<\/td>\n<\/tr>\n
Bottom \/ Middle Plate<\/strong><\/td>\n4.0mm 3K carbon fiber<\/td>\n<\/tr>\n
Top Plate<\/strong><\/td>\n2.0mm 3K carbon fiber<\/td>\n<\/tr>\n
Side Plate<\/strong><\/td>\n\u2014<\/td>\n<\/tr>\n
Camera Side Plate<\/strong><\/td>\n2.0mm 3K carbon fiber<\/td>\n<\/tr>\n
Prop Size<\/strong><\/td>\n13 inch<\/td>\n<\/tr>\n
Motor Mount<\/strong><\/td>\n16\u00d716mm \/ 19\u00d719mm<\/td>\n<\/tr>\n
FC Mounting<\/strong><\/td>\n20\u00d720mm \/ 25.5\u00d725.5mm \/ 30.5\u00d730.5mm<\/td>\n<\/tr>\n
Camera Mount<\/strong><\/td>\n19mm \/ 20mm micro FPV camera<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

<\/p>\n

Package Includes<\/h2>\n