{"id":4371,"date":"2026-05-28T15:24:19","date_gmt":"2026-05-28T07:24:19","guid":{"rendered":"https:\/\/ytcarbonfiber.com\/?post_type=product&p=4371"},"modified":"2026-06-08T23:00:25","modified_gmt":"2026-06-08T15:00:25","slug":"mark4-v2-10-inch-fpv-carbon-fiber-frame","status":"publish","type":"product","link":"https:\/\/ytcarbonfiber.com\/de\/produkt\/mark4-v2-10-inch-fpv-carbon-fiber-frame\/","title":{"rendered":"MARK4 V2 10 Inch FPV Carbon Fiber Frame"},"content":{"rendered":"

Product Details<\/h2>\n

When your build needs maximum payload capacity, longest endurance, and a platform that doesn’t flinch under heavy gear \u2014 the MARK4 V2 10 inch FPV carbon fiber frame<\/strong> is where you land. The 424mm wheelbase gives you room for 10-inch props, which means serious thrust and efficiency. This isn’t a scaled-up 7-inch. The frame geometry, arm thickness, and plate stack are all designed for what 10-inch builds actually demand: rigidity under heavy load and zero flex when you’re carrying expensive camera gear 5km from home.<\/p>\n

7mm Arms on the MARK4 V2 10 Inch FPV Carbon Fiber Frame<\/h3>\n

The 7mm arms are the headline here. Every other size in the MARK4 V2 line uses 6mm, but the 10-inch gets 7mm 3K T300 carbon fiber arms \u2014 because bigger props and heavier batteries generate more torque and more arm flex. On a 10-inch frame, arm flex isn’t just a flight performance issue. It shows up in your footage as jello, it messes with your altitude hold, and on hard landings it’s the difference between a bent arm and a broken one. We went 7mm because the 20\u201330g weight penalty is worth it for what this frame is asked to carry. And since we press our own carbon fiber sheet and cut every arm in-house, that 7mm thickness is consistent across every unit and every reorder.<\/p>\n

2.5mm Side Plates on the MARK4 V2 10 Inch Frame<\/h3>\n

The side plates step up to 2.5mm \u2014 thicker than the 2.0mm used on the 7 and 8-inch versions. On a frame this size, the side plates take more lateral stress from arm-mounted motor torque, and the extra thickness prevents the micro-vibrations that kill smooth footage on long cinematic flights. Camera side plates stay at 2.5mm to keep the camera mount rock-solid. The bottom and middle plates are 3.0mm for the structural backbone, with a 2.0mm top plate to save weight where it doesn’t compromise strength.<\/p>\n

At 235g, this MARK4 V2 10 inch FPV carbon fiber frame<\/strong> is built to carry. The stack accommodates 30.5\u00d730.5mm and 20\u00d720mm flight controllers with room for GPS, digital VTX, and larger ESCs. Motor holes fit both 16\u00d716mm and 19\u00d719mm patterns. Arm soft mounts, battery pads, straps, and full hardware are included \u2014 everything you need to build a serious long-range or heavy-lift rig.<\/p>\n

Specifications<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Property<\/th>\nValue<\/th>\n<\/tr>\n<\/thead>\n
Model<\/strong><\/td>\nMARK4 V2 10 Inch<\/td>\n<\/tr>\n
Wheelbase<\/strong><\/td>\n424mm<\/td>\n<\/tr>\n
Dimensions<\/strong><\/td>\n303 \u00d7 373 \u00d7 50.1mm<\/td>\n<\/tr>\n
Frame Weight<\/strong><\/td>\n235g (frame only)<\/td>\n<\/tr>\n
Frame Design<\/strong><\/td>\nH-Type<\/td>\n<\/tr>\n
Arm Material<\/strong><\/td>\n7mm 3K T300 carbon fiber<\/td>\n<\/tr>\n
Bottom \/ Middle Plate<\/strong><\/td>\n3.0mm 3K carbon fiber<\/td>\n<\/tr>\n
Top Plate \/ Brace<\/strong><\/td>\n2.0mm 3K carbon fiber<\/td>\n<\/tr>\n
Side Plate<\/strong><\/td>\n2.5mm 3K carbon fiber<\/td>\n<\/tr>\n
Camera Side Plate<\/strong><\/td>\n2.5mm 3K carbon fiber<\/td>\n<\/tr>\n
Prop Size<\/strong><\/td>\n10 inch<\/td>\n<\/tr>\n
Motor Mount<\/strong><\/td>\n16\u00d716mm \/ 19\u00d719mm<\/td>\n<\/tr>\n
FC Mounting<\/strong><\/td>\n20\u00d720mm \/ 30.5\u00d730.5mm<\/td>\n<\/tr>\n
Camera Mount<\/strong><\/td>\n19mm micro FPV camera<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Package Includes<\/h2>\n