{"id":4347,"date":"2026-05-27T16:03:58","date_gmt":"2026-05-27T08:03:58","guid":{"rendered":"https:\/\/ytcarbonfiber.com\/?post_type=product&p=4347"},"modified":"2026-06-08T23:07:59","modified_gmt":"2026-06-08T15:07:59","slug":"mark4-v2-7-inch-fpv-carbon-fiber-frame","status":"publish","type":"product","link":"https:\/\/ytcarbonfiber.com\/de\/produkt\/mark4-v2-7-inch-fpv-carbon-fiber-frame\/","title":{"rendered":"MARK4 V2 7 Inch FPV Carbon Fiber Frame"},"content":{"rendered":"

<\/p>\n

Product Details<\/h2>\n

If you’ve been flying 5-inch frames and want to step up to longer flights, heavier payloads, or more stable footage \u2014 the MARK4 V2 7 inch FPV carbon fiber frame<\/strong> is built for exactly that. The 295mm wheelbase and H-type layout give you the room and rigidity that long-range and cinematic builds demand. It’s not trying to be a stretched 5-inch. The geometry, arm length, and stack spacing were designed around 7-inch props from the start.<\/p>\n

6mm Arms on the MARK4 V2 7 Inch FPV Carbon Fiber Frame<\/h3>\n

The first thing that catches your eye: the 6mm arms. Most 7-inch frames stop at 4mm or 5mm. Going to 6mm adds roughly 30g but the payoff is real \u2014 less arm flex under load means your motors respond cleaner, your flight controller doesn’t fight as much noise, and your footage comes out without that faint jello that kills otherwise great clips. We’ve seen pilots try to fix vibration issues with filters and dampeners when the real fix is just a stiffer arm. Every arm is cut from our own 3K T300 carbon fiber sheet \u2014 we make the sheet, then we machine the arm, all under one roof. That matters because batch consistency from trading companies goes out the window. With us, you get the same laminate quality on every order.<\/p>\n

2.5mm Camera Side Plates on the MARK4 V2 7 Inch Frame<\/h3>\n

The three-plate stack uses a 3.0mm bottom and middle plate for the structural backbone, with a 2.0mm top plate to save weight where you don’t need max strength. The 2.5mm camera side plates are worth calling out \u2014 they hold the camera tight enough that high-frequency vibration doesn’t bleed into your footage. On long flights especially, even a tiny amount of camera mount flex shows up as annoying micro-jello.<\/p>\n

At 160g total, this MARK4 V2 7 inch FPV carbon fiber frame<\/strong> holds its own against lighter competitors while being noticeably more solid in the air. Arm soft mounts come included \u2014 they sit between the arm and the frame body to eat motor vibration before it hits your FC. It’s a small detail but it makes a real difference in filter headroom, especially on 6S setups where motor RPM is high. Battery pads and straps are in the box too, so you can build it straight away without hunting for parts.<\/p>\n

<\/p>\n

Specifications<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Property<\/th>\nValue<\/th>\n<\/tr>\n<\/thead>\n
Model<\/strong><\/td>\nMARK4 V2 7 Inch<\/td>\n<\/tr>\n
Wheelbase<\/strong><\/td>\n295mm<\/td>\n<\/tr>\n
Dimensions<\/strong><\/td>\n228 \u00d7 267 \u00d7 48.75mm<\/td>\n<\/tr>\n
Frame Weight<\/strong><\/td>\n160g (frame only)<\/td>\n<\/tr>\n
Frame Design<\/strong><\/td>\nH-Type<\/td>\n<\/tr>\n
Arm Material<\/strong><\/td>\n6mm 3K T300 carbon fiber<\/td>\n<\/tr>\n
Bottom \/ Middle Plate<\/strong><\/td>\n3.0mm 3K carbon fiber<\/td>\n<\/tr>\n
Top Plate<\/strong><\/td>\n2.0mm 3K carbon fiber<\/td>\n<\/tr>\n
Side Plate<\/strong><\/td>\n2.0mm 3K carbon fiber<\/td>\n<\/tr>\n
Camera Side Plate<\/strong><\/td>\n2.5mm 3K carbon fiber<\/td>\n<\/tr>\n
Prop Size<\/strong><\/td>\n7 inch<\/td>\n<\/tr>\n
Motor Mount<\/strong><\/td>\n16\u00d716mm \/ 19\u00d719mm<\/td>\n<\/tr>\n
FC Mounting<\/strong><\/td>\n20\u00d720mm \/ 30.5\u00d730.5mm<\/td>\n<\/tr>\n
Camera Mount<\/strong><\/td>\nMicro \/ Nano (adjustable tilt)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

<\/p>\n

Package Includes<\/h2>\n